Etesia - SKF
Effective on uneven terrain and steep slopes (30%). Attila SKF has wheels with an agrarian profile, and also a very low centre of gravity and optimised weight distribution (33% to the front, 67% to the rear), for easy driveability and stability on banking.
The differential lock with foot control is very practical in use, and will allow you to retain control while mowing on slopes, even if a drive wheel loses adherence.
Hand or foot control for drive transmission, from 0 to 10 km/h: select the control you prefer and adapt your speed precisely to the terrain (slopes, obstacles etc.) or grass for closely controlled mowing.
Cruise control system to maintain your working speed, a feature that is highly appreciated while mowing large areas.
Silent, low vibration, thanks in particular to its soundproofed housing and silent block mounted engine, Attila SKF sets the standards in the area of comfort and use. It cuts the noise levels of market standards by up to a half. You will feel the difference, especially during prolonged use.
A mower that can be adapted to your build...The seat has armrests and moves forward and back on a rail for adjustment, the seat suspension firmness is adjustable, as is the steering wheel tilt.
The steering system is responsive, smooth and requires no effort. The wheel has a knob for dynamic and enjoyable driving, especially on rougher terrain or with obstacles.
All the controls are accessible from the driver's seat for maximum comfort and greater safety.
Many features as standard:
Dashboard controls: ignition, blade start-up, lamps, horn and maintenance/operation hour counter are centralised on the dashboard. Towing ring. Drawbar (for trailer). Front lamp, horn. Seat armrests.
Safe in every respect.
In addition to compliance with all the applicable standards and directives, Attila SKF goes even further in terms of safety:
•The parking brake is controlled with a pedal and is very easy to apply and release.
•The pedal position is designed to be extremely ergonomic.
•Tank filling is clean and safe - a retention duct drains away extra fuel in the event of a spill.
Practical and intuitive maintenance.
Nothing needs to be removed to change the engine oil, thanks to a valve fitted on the engine. The valve is extended by a pipe that drains the oil away to the rear of the machine from where it can be collected easily. No removal for changing the oil and replacing the drive transmission filter, with easy access to the rear of the machine.
Profiled mowing deck, and reversible swing tip blades (85 cm cutting width). The system allows mowing in difficult conditions.
Built to last!
Reinforced hydrostatic transmission with Outils WOLF specifications that draw on automotive features: torque higher than market standards, smoother movement and a longer life.
Cutting decks designed specially to withstand different mowing conditions for a long period: Mastershock (with steel reinforcements). Reversible blade flails. The system allows mowing in difficult conditions.
Deflector integrated into the cutting deck for sideways ejection when the grass is too long.
Easy to use with tool-free locking. The deflector folds away in case of an impact.
The projection guard ensures safety.
Change from the mulching to the high grass mowing or brushcutting...
You can fit the mulching cutting deck of Biocut SKM to Atilla SKF. The change is quick and requires no tool. The wheels may also be replaced.
Professional use No
Private use Yes
Square footage recommended (m²) 2000 to 5000 m²
Mowingtype Mowing - Bruschcutting
Road homologation No
MotorCapacity (cm³) 585
Horse power (HP) 17
Fuel tank capacity 10.00 L
Wheel Transmission type Hydrostatic
Number of wheel drive 2
Forward speed (km/h) 10.00
Reverse speed (km/h) 7.00
Un-cut surface area (m²) 1.00
Working angle % 30
Acoustic pressure 85
MowerTheoretical output (m²/h) 8500
Number of blades 1
Cutting width (cm) 85
measurement and weightHeight (cm) 99.00
Width (cm) 97.00
Length (cm) 201.00
weight (kg) 285.00
Please phone for our best price